Kawasaki Brings the Ninja H2 Back with a Reworked Supercharged Engine

Kawasaki has rebuilt the Ninja H2’s supercharged 998cc four-cylinder to meet Euro 5+

The Ninja H2 is back in Europe, and from the outside it looks almost unchanged. Underneath is another story. Kawasaki has reworked nearly every major part of the supercharged 998cc four-cylinder so it meets Euro 5+ emissions rules, which means the H2 can be sold in Europe again.

Kawasaki Brings the Ninja H2 Back to Europe and the UK With a Reworked Supercharged Engine

New Internals, Familiar Bodywork

The list of new engine parts is long. It includes the supercharger impeller, the whole intake system, the pistons, cylinder, cylinder head, crankshaft and camshafts. The throttle bodies are new and the gear ratios have changed.
The exhaust is new as well, with revised pipe diameters and a redesigned pre-chamber. The polished twin-outlet can has gone, replaced by a compact single-exit silencer. Kawasaki says the lighter system adds torque in the low and mid-range.

Less Peak Power, by Design

Output is 209hp (154kW) at 11,000rpm, measured with ram air. Peak torque is 135Nm at 8,500rpm. When the H2 was last homologated in the US, it was listed at 228hp, so on paper the new bike has less power.

Kawasaki says it wanted more mid-range strength while keeping the H2’s familiar surge at high revs. That is the company’s stated goal, and no independent riding impressions are available yet. Weight is unchanged at 238kg ready to ride.

Kawasaki Brings the Ninja H2 Back to Europe and the UK With a Reworked Supercharged Engine

A Shared Heart With the H2 SX?

This is where it gets interesting. The new H2 has the same 76 x 55mm bore and stroke as the 2026 H2 SX sport tourer. It also makes peak power and peak torque at exactly the same revs. The single-outlet exhaust already appears on the H2 SX and the Z H2, and both have met the stricter rules all along.

Kawasaki has not confirmed a shared base or commented on the overlap. Still, the parallels are hard to ignore.

Brakes, Chassis and Electronics

The H2 is the first Kawasaki to use Brembo Hypure four-piston calipers, which replace the Stylema units. They clamp 330mm semi-floating discs. The trellis frame stays, along with a 43mm KYB AOS-II fork, an Öhlins TTX36 shock and an electronic Öhlins steering damper.

A new dash offers two layouts. One places supercharger readings at its centre and shows lean angle in an aviation-style graphic. Nice. The traction and launch control systems have been reworked, and the bike keeps cornering ABS, a two-way quickshifter and cruise control.

Kawasaki Brings the Ninja H2 Back to Europe and the UK With a Reworked Supercharged Engine

Before you go

Liked that? There’s a weekly email.

The best of Tarmac Life — reviews, news and what’s on the show — once a week, straight to your inbox.

Free. No spam. Unsubscribe in one click.

Share your love
Facebook
Twitter

Newsletter

The Tarmac Life Email

Get Tarmac Life in your inbox

One email a week: what’s on the show, the week’s best reads, and the odd bit of automotive nonsense.

Free. No spam. Unsubscribe in one click.

Support our advertisers


Paying bills

Ads from the Googles

Support our advertisers

Leave a Reply

Your email address will not be published. Required fields are marked *

Secret Link

Get the weekly Tarmac Life email